OC - Optical Components

 Download this chapter

OC-0005 Biconcave lens f=-5 mm, C25 mountA biconcave lens with a diameter of 5 mm and a focal length of -5 mm is mounted into a C25 mount with a free opening of 4 mm.OC-0005 Biconcave lens f=-5 mm, C25 mount

OC-0010 Biconcave lens f=-10 mm, C25 mountA biconcave lens with a diameter of 10 mm and a focal length of -10 mm is mounted into a C25 mount with a free opening of 8 mm.OC-0010 Biconcave lens f=-10 mm, C25 mount

OC-0020 Biconcave lens f=-20 mm in C25 mountA biconcave lens with a diameter of 20 mm and a focal length of -20 mm is mounted into a C25 mount with a free opening of 16 mm.OC-0020 Biconcave lens f=-20 mm in C25 mount

OC-0040 Plano-convex lens f=40 mm in C25 mountA plano-convex lens with a diameter of 22 mm and a focal length of 40 mm is mounted into a C25 mount with a free opening of 20 mm. OC-0040 Plano-convex lens f=40 mm in C25 mount

OC-0060 Plano-convex lens f=60 mm in C25 mountA plano-convex lens with a diameter of 22 mm and a focal length of 60 mm is mounted into a C25 mount with a free opening of 20 mm. OC-0060 Plano-convex lens f=60 mm in C25 mount

OC-0068 Biconvex lens f=60 mm in C25 extendedA biconvex lens with a diameter of 22 mm and a focal length of 60 mm is mounted at the end of a 25 mm housing. A C25 mount is attached to the housing to insert the component into a C25 mounting plate.OC-0068 Biconvex lens f=60 mm in C25 extended

OC-0100 Front face mirror in C25 mountA silver coated front face mirror with protective coating is mounted into a C25 mount with a free opening of 20 mmOC-0100 Front face mirror in C25 mount

OC-0120 Achromat f=20 mm in C25 mountAn achromatic lens with a focal length of 20 mm is mounted into a C25 mount with a free opening of 8 mm.OC-0120 Achromat f=20 mm in C25 mount

OC-0140 Achromat f=40 mm in  C30 mountAn achromatic lens with a diameter of 25.4 mm and a focal length of 40 mm is mounted into a C30 mount with a free opening of 22 mm. OC-0140 Achromat f=40 mm in  C30 mount

OC-0152 Biconvex lens f=150 mm in C50 mountA biconvex lens with a diameter of 48 mm and a focal length of 150 mm is mounted into a C50 mount with a free opening of 45 mm.OC-0152 Biconvex lens f=150 mm in C50 mount

OC-0152 Biconvex lens f=150 mm in C50 mountA biconvex lens with a diameter of 22 mm and a focal length of 150 mm is mounted into a C25 mount with a free opening of 20 mm.OC-0152 Biconvex lens f=150 mm in C50 mount

OC-0160 Collimator 445 nm in C25 mountAn aspheric glass lens with an anti reflex coating for 445 nm has a back focal length of 4 mm and is suited to collimate the divergent laser radiation of a laser diode into an almost parallel beam.OC-0160 Collimator 445 nm in C25 mount

OC-0170 Collimator 808 nm in C25 mountAn aspheric glass lens with an anti reflex coating for 808 nm has a back focal length of 4 mm and is suited to collimate the divergent laser radiation of a laser diode into an almost parallel beam.OC-0170 Collimator 808 nm in C25 mount

OC-0220 Cylindrical lens f = 20 mm in C25 mountA rounded cylindrical lens with a diameter of 20 mm and focal length of 20 mm is mounted into a C25 mount with a free opening of 16 mmOC-0220 Cylindrical lens f = 20 mm in C25 mount

OC-0280 Cylindrical lens f=80 mm in C25 mountA rounded cylindrical lens with a diameter of 20 mm and focal length of 80 mm is mounted into a C25 mount with a free opening of 16 mm.OC-0280 Cylindrical lens f=80 mm in C25 mount

OC-0320 Beam expander x2.7 in ø25 housingThe beam expander is based on a Galilean telescope with one concave lens as entry lens and a plano-convex as exit lens. The expansion ratio is defined by the ratio of the focal length of the lenses. The entry lens is mounted into a C25 mount which screwed to the 25 mm housing at which end the exit lens is mounted. This beam expander has an expansion rate of 2.7. The telescope is aligned for far sight view and can be slightly changed by turning the C25 mount to change the parallel wave front into curved ones.  OC-0320 Beam expander x2.7 in ø25 housing

OC-0360 Beam Expander x6 in ø25 housingThe beam expander is based on a Galilean telescope with one concave lens as entry lens and a plano-convex as exit lens. The expansion ratio is defined by the ratio of the focal length of the lenses. The entry lens is mounted into a C25 mount which screwed to the 25 mm housing at which end the exit lens is mounted. This beam expander has an expansion rate of 6. The telescope is aligned for far sight view and can be slightly changed by turning the C25 mount to change the parallel wave front into curved ones OC-0360 Beam Expander x6 in ø25 housing

OC-0380 Beam expander x8 in ø 25 mm housingThe beam expander is based on a Galilean telescope with one concave lens as entry lens and a plano-convex as exit lens. The expansion ratio is defined by the ratio of the focal length of the lenses. The entry lens is mounted into a C25 mount which screwed to the 25 mm housing at which end the exit lens is mounted. This beam expander has an expansion rate of 8. The telescope is aligned for far sight view and can be slightly changed by turning the C25 mount to change the parallel wave front into curved ones.OC-0380 Beam expander x8 in ø 25 mm housing

OC-0400 Adjustable iris mounted in C25The adjustable iris is mounted into a C25 mount and has a minimum opening of 1 mm and the maximum opening is 14 mm.OC-0400 Adjustable iris mounted in C25

OC-0420 LDA alignment aidThis alignment aid is used to check the parallel adjustment of both LDA beams before the focusing lens is inserted. When both beams are passing the plate in various distances they are parallel and they propagate in the same plane. During the LDA operation this plate is turned by 90 degrees to prevent the LDA laser beams reaching the photodetector. OC-0420 LDA alignment aid

OC-0430 Fibre jacket in C25 mountA FSMA fibre coupler is mounted into a C25 mount to enable the use of optical fibre with C25 mounting plates. OC-0430 Fibre jacket in C25 mount

OC-0460 Transmission grating 600 l/mmA transmission grating with 600 lines per mm is mounted into a 50x50 mm frame. The thickness is 3 mm and fits into the filter plate holder MM-0060.OC-0460 Transmission grating 600 l/mm

OC-0470 Wire 0.05 mm in 50x50 frameA thin wire is placed between two glass plates and is mounted into a 50x50 mm frame. The thickness is 3 mm and fits into the filter plate holder MM-0060.OC-0470 Wire 0.05 mm in 50x50 frame

OC-0480 Circular apertures in 50x50 mm frameA mask with circular apertures 0.30, 0.60, 1.0 and 1.40 nominal diameter is mounted into a 50x50 mm frame. The thickness is 3 mm and fits into the filter plate holder MM-0060 and can be traversed to select the required hole.OC-0480 Circular apertures in 50x50 mm frame

OC-0482 Gauze 300 mesh in 50x50 mm frameA gauze with 300 mesh mounted into a 50x50 mm frame and serves as two dimensional coarse grating.OC-0482 Gauze 300 mesh in 50x50 mm frame

OC-0484 Single slit 0.06 mm in 50x50 mm frameA mask with a 0.06 mm wide slit is mounted into a 50x50 mm frame. The thickness is 3 mm and fits into the filter plate holder MM-0060 and can be traversed to select the best position.OC-0484 Single slit 0.06 mm in 50x50 mm frame

OC-0486 Double slit in 50x50 mm frameA mask with two 0.06 mm wide slits is mounted into a 50x50 mm frame. The thickness is 3 mm and fits into the filter plate holder MM-0060 and can be traversed to select the best position.OC-0486 Double slit in 50x50 mm frame

OC-0490 Sample transmission hologram (chess  pieces)A professional transmission hologram is framed in a 50x50 mm frame. The sample shows what should be achievable with the holography experiment.OC-0490 Sample transmission hologram (chess  pieces)

OC-0500 Beam splitter plate ø 25 mountThe beam splitter plate has a splitting ratio of 50/50 % at a wavelength of 632 nm. It is set into a slotted holder with a 25 mm mounting cylinder which can be inserted into the adjustment holder OM-0010.OC-0500 Beam splitter plate ø 25 mount

OC-0510 Polarising beam splitter cube on 25 mm stageA polarizing beam splitter cube with a 20 mm side length and is set into the collar of a 25 mm stage. The arrangement separates an incoming beam into two orthogonal polarized beams. A prism is cemented to the cube in order to deviate an incoming beam from the opposite direction. This component is specifically used in a technical Michelson interferometer.OC-0510 Polarising beam splitter cube on 25 mm stage

OC-0520 Triple reflector in extended 1” mountA rounded triple reflector with a 1 “ diameter is set into a 30 mm mount with a rear cylinder with a diameter of 1”. This enables the component to be attached to a 1” kinematic mount.OC-0520 Triple reflector in extended 1” mount

OC-0530 Ruby crystal in C25 mountAn industrial Ruby ball with a diameter of 6 mm is placed into a C25 mount with a free opening of 4 mm.OC-0530 Ruby crystal in C25 mount

OC-0550 Nd:YAG rod in CR25 mountA CR25 mount is designed to fit into the 4 axes adjustment holder MM-0420. It consists out of the main body, a disk for holding a small optical component and a threaded retaining ring. In this CR25 a 3x3 and 5 mm long Nd:YAG crystal with anti reflex coating for 1064 nm on both sides is mounted.OC-0550 Nd:YAG rod in CR25 mount

OC-0710 Polarizer in C25 mountA film sheet polarizer is set into a C25 mount with a tick mark as vertical polarisation indicator. The free opening is 20 mm.OC-0710 Polarizer in C25 mount

OC-0720 Fresnel zone plate in C25 mountA mask with a fresnel zone designed for 532 nm, 99 fringes and a focal length of 100 mm is mounted into a C25 mount. The Fresnel zone plate has been calculated and rendered by a computer and subsequently exposed to a high resolution black and white film as used in the professional printing machines.OC-0720 Fresnel zone plate in C25 mount

OC-0730 Fabry Perot plate in C25 mountTwo precise glass plates with a reflectivity of 50% are set into a C25 mount. A precise spacer of 3 mm separates the plates forming an air spaced Fabry Perot.OC-0730 Fabry Perot plate in C25 mount

OC-0740 Newton’s rings optics in C25 mountA combination of a glass plate and a plano-convex lens are set into a C25 mount in such a way that the lens lightly touches the glass plate. To enhance the visibility of the effect, the glass plate has a coating with 50% reflectivity.OC-0740 Newton’s rings optics in C25 mount

OC-0750 Laser line filter 532 nm in C25 mountA laser line filter with a central wavelength (CWL) of 532 nm and a spectral width of 10 nm (FWHM) and a diameter of 12.7 mm is set into a C25 mount with a free opening of 11 mm.OC-0750 Laser line filter 532 nm in C25 mount

OC-0754 Laser line filter 810 nm in C25 mountA laser line filter with a central wavelength (CWL) of 810 nm and a spectral width of 10 nm (FWHM) and a diameter of 12.7 mm is set into a C25 mount with a free opening of 11 mm.OC-0754 Laser line filter 810 nm in C25 mount

OC-0756 Laser line filter 1064 nm in C25 mountA laser line filter with a central wavelength (CWL) of 1064 nm and a spectral width of 10 nm (FWHM) and a diameter of 12.7 mm is set into a C25 mount with a free opening of 11 mm.OC-0756 Laser line filter 1064 nm in C25 mount

OC-0758 Laser line filter 980 nm in C25 mountA laser line filter with a central wavelength (CWL) of 980 nm and a spectral width of 10 nm (FWHM) and a diameter of 12.7 mm is set into a C25 mount with a free opening of 11 mm.OC-0758 Laser line filter 980 nm in C25 mount

OC-0760 Laser line filter 1550 nm in C25 mountA laser line filter with a central wavelength (CWL) of 1550 nm and a spectral width of 10 nm (FWHM) and a diameter of 12.7 mm is set into a C25 mount with a free opening of 11 mm.OC-0760 Laser line filter 1550 nm in C25 mount

OC-0810 Mica plate in C25 mountA thin (0.1) Mica plate is mounted into a C25 mount and serves as optical retarder for multiple orders.OC-0810 Mica plate in C25 mount

OC-0820 Calcite crystal on rod and carrierA calcite crystal is shaped in such a way that a laser beam travels parallel to the crystal axis. By turning the crystal the laser beam travels perpendicular to the optical axis. The crystal is mounted to a rod which has a special shaped top to accommodate the crystal. The rod is screwed to the centre M6 thread of the 30 mm wide carrier MG30.OC-0820 Calcite crystal on rod and carrier

OC-0830 Optical quartz plate in C25 mountA quartz plate made from natural quartz with a thickness of 3 mm has a diameter of 12.7 mm and is cut parallel to the optical axis of the crystal. The quartz plate is mounted into a C25 mount.OC-0830 Optical quartz plate in C25 mount

OC-0840 Quarter-wave plate in C25 mountA quartz plate made from natural quartz with a thickness of multitudes of λ/4 has a diameter of 12.7 mm and is cut parallel to the optical axis of the crystal. The quartz plate is mounted into a C25 mount.OC-0840 Quarter-wave plate in C25 mount

OC-0850 Half-wave plate in C25 mountA quartz plate made from natural quartz with a thickness of multitudes of λ/2 has a diameter of 12.7 mm and is cut parallel to the optical axis of the crystal. The quartz plate is mounted into a C25 mount.OC-0850 Half-wave plate in C25 mount

OC-0860 Nd:YAG rod 1.3 µm coating, M16 mountBeside the well known emission wavelength of 1.064 µm of a Nd:YAG Laser another wavelength centred at 1.3 µm can be obtained when using optimized optical components. This component provides a Nd:YAG rod which is coated for high reflectivity at 1.3 µm.OC-0860 Nd:YAG rod 1.3 µm coating, M16 mount

OC-0870 “Red 660 nm” SHG crystal mounted KTP in mountA CR25 mount is designed to fit into the 4 axes adjustment holder MM-0420. It consists out of the main body, a disk for holding a small optical component and a threaded retaining ring. Into this CR25 a 3x3 and 5 mm long KTP crystal is mounted for the second harmonic generation 1330 → 665 nm with anti reflex coating for 1330 nm on both sides.OC-0870 “Red 660 nm” SHG crystal mounted KTP in mount

OC-0880 GCL (Green Core Laser) in CR25 mountA CR25 mount is designed to fit into the 4 axes adjustment holder MM-0420. It consists out of the main body, a disk for holding a small optical component and a threaded retaining ring. Into this CR25 a green core laser (GLC) consisting of a combination of a Nd:YVO4 and KTP crystal is mounted. When pumped by an 808 nm laser diode the GLC emits green radiation at 532 nm but also residual 1064 nm and 808 nm.OC-0880 GCL (Green Core Laser) in CR25 mount

OC-0910 Filter KG5, 50 x 50 x 3 mmThis coloured glass filter has a size of 50x50 mm and a thickness of 3 mm and is used to block the near infrared radiation above 700 nm and transmit the visible part of the spectrum.OC-0910 Filter KG5, 50 x 50 x 3 mm

OC-0920 V(λ) filter in C50 mountA V(λ) filter has the same spectral transmission curve as the spectral sensitivity curve of the human eye. This filter is used in conjunction with classical lamps to study and measure the optical power in radiometric and photometric units. The filter is mounted into a C50 mount.OC-0920 V(λ) filter in C50 mount

OC-0939 Filter BG39, 50 x 50 x 3 mmThis coloured glass filter has a size of 50x50 mm and a thickness of 3 mm and is used to block the near infrared radiation above 700 nm and transmit the green 532 nm radiation created by second harmonic generation.OC-0939 Filter BG39, 50 x 50 x 3 mm

OC-0950 Filter RG1000 50x50x3 mmThis coloured glass filter has a size of 50x50 mm and a thickness of 3 mm and is used to block the radiation below 1000 nm and transmit the NIR part of the spectrum.

OC-0970 Filter GG495, 50 x 50 x 3 mmThis coloured glass filter has a size of 50x50 mm and a thickness of 3 mm and is used to block the blue radiation below 495 nm and transmit the visible part of the spectrum.OC-0970 Filter GG495, 50 x 50 x 3 mm

OC-0980 Filter UG11 in C25 mountThis coloured glass filter has a diameter of 20 mm and a thickness of 3 mm and is used to transmit the UV radiation around 320 nm and to block the visible radiation above 400 nm.OC-0980 Filter UG11 in C25 mount

OC-1000 Laser mirror M16, flat, T 3% @ 632 nmThe M16 mirror mount is designed to accommodate 1/2” (12.7) mirror with a thickness of 1/4” (6.35 mm). The mirror is kept in position by a radially spring loaded flap. At the bottom of the mirror a soft rubber ring is placed to achieve an elastic contact to the surface of the mirror face to its adjustment holder. When the laser mirror is not in use a protective cap with M16 thread is screwed on top of it. This laser mirror has a flat surface and a transmission of 3% at a wavelength of 632 nm.OC-1000 Laser mirror M16, flat, T 3% @ 632 nm

OC-1005 Laser mirror M16, flat, HR @ 632 nmThe M16 mirror mount is designed to accommodate 1/2” (12.7) mirror with a thickness of 1/4” (6.35 mm). The mirror is kept in position by a radially spring loaded flap. At the bottom of the mirror a soft rubber ring is placed to achieve an elastic contact to the surface of the mirror face to its adjustment holder. When the laser mirror is not in use a protective cap with M16 thread is screwed on top of it. This laser mirror has a flat surface and a high reflectivity (> 99.9 %) at a wavelength of 632 nm.OC-1005 Laser mirror M16, flat, HR @ 632 nm

OC-1010 Laser mirror M16, flat, HR @ 632 nmLaser mirror M22, ROC 100 mm, T 4% @ 532 & 632 nmThis laser mount has a short M22 thread at his rear side and is screwed into the “MM-0510 Kinematic mount with axial translation on MG30 .The 1/2” mirror is kept in position by a radial M4 grub screw with a plastic tip. This laser mirror has a transmission of 4% ad 532 and 632 nm and a radius of curvature of 100 mm.OC-1010 Laser mirror M16, flat, HR @ 632 nm

OC-1094 Laser mirror M12, ROC 100 mm, T 4% @ 532 & 632 nmTo attach the mirror to a piezo electric element it is mounted into a holder which fits to the M12 thread of the piezo element. By means of a threaded ring the mirror is pressed and centred against a soft rubber ring. This components contains a 1/2” mirror with a radius of curvature of 100 mm and transmission of 4% at 532 and 632 nm.OC-1094 Laser mirror M12, ROC 100 mm, T 4% @ 532 & 632 nm

OC-1096 Laser mirror M12, ROC 75 mm, T 4% @ 532 and 632 nmTo attach the mirror to a piezo electric element it is mounted into a holder which fits to the M12 thread of the piezo element. By means of a threaded ring the mirror is pressed and centred against a soft rubber ring. This components contains a 1/2” mirror with a radius of curvature of 75 mm and a transmission of 4% at 532 and 632 nm.OC-1096 Laser mirror M12, ROC 75 mm, T 4% @ 532 and 632 nm

OC-1098 Laser mirror M12, ROC 75 mm, T 4% @ 532 and 632 nmLaser mirror M22, ROC 75 mm, T 4% @ 532 and 632 nmThis laser mount has a short M22 thread at his rear side and is screwed into the “MM-0510 Kinematic mount with axial translation on MG30. The 1/2 mirror is kept in position by a radial M4 grub screw with a plastic tip. This laser mirror has a radius of curvature of 75 mm and a transmission of 4% at 532 and 632 nmOC-1098 Laser mirror M12, ROC 75 mm, T 4% @ 532 and 632 nm

OC-1098 Laser mirror M12, ROC 75 mm, T 4% @ 532 and 632 nmLaser mirror M22, ROC 75 mm, T 4% @ 532 and 632 nmThis laser mount has a short M22 thread at his rear side and is screwed into the “MM-0510 Kinematic mount with axial translation on MG30. The 1/2 mirror is kept in position by a radial M4 grub screw with a plastic tip. This laser mirror has a radius of curvature of 75 mm and a transmission of 4% at 532 and 632 nmOC-1098 Laser mirror M12, ROC 75 mm, T 4% @ 532 and 632 nm

OC-1110 Laser mirror 1/2” in 1” mount, ROC flat, HR 550-800 nmThe 1/2” laser mirror is set into an adapter with an outer diameter of 1” which fits into the kinematic laser mirror adjustment mounts. The mirror is kept in position by a radial grub screw with a soft nylon tip. This laser mirror has a flat surface and a high reflectivity (>99.9%) in a wavelength range of 550 to 800 nm.OC-1110 Laser mirror 1/2” in 1” mount, ROC flat, HR 550-800 nm

OC-1114 Laser mirror 1/2”, ROC flat, HT 532, HR 540-700 nmThe 1/2” laser mirror is set into an adapter with an outer diameter of 1” which fits into the kinematic laser mirror adjustment mounts. The mirror is kept in position by a radial grub screw with a soft nylon tip. This laser mirror has a flat surface and a high reflectivity (>99.9%) in a wavelength range of 540 to 700 nm and a high transmission for 532 nm.OC-1114 Laser mirror 1/2”, ROC flat, HT 532, HR 540-700 nm

OC-1116 Laser mirror 1/2, ROC 250 nm, HR 520-700 nmThe 1/2” laser mirror is set into an adapter with an outer diameter of 1” which fits into the kinematic laser mirror adjustment mounts. The mirror is kept in position by a radial grub screw with a soft nylon tip. This laser mirror has a radius of curvature of 250 mm and a high reflectivity (>99.9%) in a wavelength range of 540 to 700 nm and a high transmission for 532 nm.OC-1116 Laser mirror 1/2, ROC 250 nm, HR 520-700 nm

OC-1130 Laser mirror M16, ROC flat, HT 445, HR 500-740 nmThe M16 mirror mount is designed to accommodate 1/2” (12.7) mirror with a thickness of 1/4” (6.35 mm). The mirror is kept in position by a radially spring loaded flap. At the bottom of the mirror a soft rubber ring is placed to achieve an elastic contact to the surface of the mirror face to its adjustment holder. When the laser mirror is not in use a protective cap with M16 thread is screwed on top of it. This laser mirror has a flat surface and a high reflectivity (> 99.9 %) in a wavelength range from 500 nm to 740 nm and a high transmission for 445 nm.OC-1130 Laser mirror M16, ROC flat, HT 445, HR 500-740 nm

OC-1134 Laser mirror M16, ROC 100, HT 445, HR 500-740 nmThe M16 mirror mount is designed to accommodate 1/2” (12.7) mirror with a thickness of 1/4” (6.35 mm). The mirror is kept in position by a radially spring loaded flap. At the bottom of the mirror a soft rubber ring is placed to achieve an elastic contact to the surface of the mirror face to its adjustment holder. When the laser mirror is not in use a protective cap with M16 thread is screwed on top of it. This laser mirror has a radius of curvature of 100 mm and a high reflectivity (> 99.9 %) in a wavelength range of 500 to 740 nm and a high transmission at 445 nm.OC-1134 Laser mirror M16, ROC 100, HT 445, HR 500-740 nm

OC-1136 Laser mirror M16, ROC 150, HT445, HR 500-740 nmThe M16 mirror mount is designed to accommodate 1/2” (12.7) mirror with a thickness of 1/4” (6.35 mm). The mirror is kept in position by a radially spring loaded flap. At the bottom of the mirror a soft rubber ring is placed to achieve an elastic contact to the surface of the mirror face to its adjustment holder. When the laser mirror is not in use a protective cap with M16 thread is screwed on top of it. This laser mirror has a radius of curvature of 150 mm and a high reflectivity (> 99.9 %) in a wavelength range of 500 to 740 nm and a high transmission at 445 nm.OC-1136 Laser mirror M16, ROC 150, HT445, HR 500-740 nm

OC-1138 Laser mirror 1” mount, ROC 100, HT 445 nm, HR 500-740 nmThe 1/2” laser mirror is set into an adapter with an outer diameter of 1” which fits into the kinematic laser mirror adjustment mounts. The mirror is kept in position by a radial grub screw with a soft nylon tip. This laser mirror has a radius of curvature of 100 mm and a high reflectivity (>99.9%) in a wavelength range of 580 to 725 nm and a high transmission at a wavelength of 445 nm.OC-1138 Laser mirror 1” mount, ROC 100, HT 445 nm, HR 500-740 nm

OC-1154 Laser mirror M16, ROC 150, HR640/HT320The M16 mirror mount is designed to accommodate 1/2” (12.7) mirror with a thickness of 1/4” (6.35 mm). The mirror is kept in position by a radially spring loaded flap. At the bottom of the mirror a soft rubber ring is placed to achieve an elastic contact to the surface of the mirror face to its adjustment holder. When the laser mirror is not in use a protective cap with M16 thread is screwed on top of it. This laser mirror has a radius of curvature of 150 mm and a high reflectivity (> 99.9 %) at a wavelength of 640 nm and a high transmission at 320 nm.OC-1154 Laser mirror M16, ROC 150, HR640/HT320

OC-1200 Laser mirror C30, ROC flat, HR @ 632 nmA flat laser mirror with a diameter of 1” is set into a C30 mount. The mirror has a high reflectivity for 632 nm.OC-1200 Laser mirror C30, ROC flat, HR @ 632 nm

OC-S010 Set of mirror (ROC flat and 100 mm) for 520 nm operationThe coating of the mirrors is designed for high reflectivity (>99.98%) for 520 nm to achieve the laser oscillation for this wavelength. The set consists of two mirrors whereby one has a flat surface and the other one a radius of curvature of 100 mm. The mirrors are kept in M16 holder and when not in use the provided plastic caps are screwed on top for protecting the mirror surface.OC-S010 Set of mirror (ROC flat and 100 mm) for 520 nm operation

OC-S020 Set of mirror ( flat and ROC 100) for 604 nm operationThe coating of the mirrors is designed for high reflectivity (>99.98%) for 604 nm to achieve the laser oscillation for this wavelength. Furthermore the reflectivity is designed for high losses above 630 nm and below 550 nm to suppress undesired laser oscillation in this range. The set consists of two mirrors whereby one has a flat surface and the other one a radius of curvature of 100 mm. The mirrors are kept in M16 holder and when not in use the provided plastic caps are screwed on top for protecting the mirror surface.OC-S020 Set of mirror ( flat and ROC 100) for 604 nm operation

OC-2010 ST/ST SM Fibre patch cable, length 0.25 mA single mode fibre with a 9 µm core and 125 µm cladding with a plastic buffer is terminated with two ST fibre connectors. The length of the fibre patch cable is 25 cm.OC-2010 ST/ST SM Fibre patch cable, length 0.25 m

OC-2020 ST/ST SM Fibre patch cable, length 1 mA single mode optical fibre with a 9 µm core and 125 µm cladding with a plastic buffer is terminated with two ST fibre connectors. The length of the fibre patch cable is 100 cm.

OC-2030 ST/ST MM Fibre patch cable, length 1 mA multimode optical fibre with a 50 µm core and 125 µm cladding with a plastic buffer is terminated with two ST fibre connectors. The length of the fibre patch cable is 100 cm. OC-2030 ST/ST MM Fibre patch cable, length 1 m

OC-2040 Set of 10 ST pigtailed MM fibreA single mode optical fibre with a 9 µm core and 125 µm cladding with a plastic buffer is terminated with one ST fibre connector and the other side is left blank. The length of each fibre patch cable is 200 cmOC-2040 Set of 10 ST pigtailed MM fibre

OC-2100 SM Fibre collimatorThe collimator has a single mode ST connector and is set into a C25 mount. The aspheric collimator lens has a anti reflex coating and transforms the divergent beam coming from the connected fibre into an almost parallel beam.OC-2100 SM Fibre collimator

OC-2110 SM Fibre optical isolator, 980 nm, ST terminatedThis module provides an fibre coupled optical diode based on the Faraday effect and is used to force the oscillation of a fibre ring laser into one direction. The connection to the diode is carried out with ST single mode panel jacks.OC-2110 SM Fibre optical isolator, 980 nm, ST terminated

OC-2200 Erbium doped fibre unit, ST terminated 1.5 mThis module contains a spool with a 1.5 m long Erbium doped fibre. Both end are terminated with single mode connectors and are plugged into single mode fibre panel jacks.

OC-2210 Erbium doped fibre unit, ST terminated 4.0 mThis module contains a spool with a 4.0 m long Erbium doped fibre. Both end are terminated with single mode connectors and are plugged into single mode fibre panel jacks.OC-2210 Erbium doped fibre unit, ST terminated 4.0 m

OC-2220 Erbium doped fibre unit, ST terminated 8.0 mThis module contains a spool with a 8.0 m long Erbium doped fibre. Both end are terminated with single mode connectors and are plugged into single mode fibre panel jacks.OC-2220 Erbium doped fibre unit, ST terminated 8.0 m

OC-2230 Erbium doped fibre unit, ST terminated 16.0 mThis module contains a spool with a 16.0 m long Erbium doped fibre. Both end are terminated with single mode connectors and are plugged into single mode fibre panel jacks.OC-2230 Erbium doped fibre unit, ST terminated 16.0 m

OC-2300 SM-WDM coupler 980/1550 nm unit ST terminatedThis wavelength division multiplexer is designed to feed the radiation of a 980 nm Laser into a fibre loop for 1.550 nm. It is used as “pump gate” for Erbium doped fibres in a linear as well as ring configuration. The individual in- and outputs of the WDM are connected to ST connectors.OC-2300 SM-WDM coupler 980/1550 nm unit ST terminated

OC-2350 SM Four port fibre coupler unitA 2x2 wide band Fibre optic coupler is designed for a central wavelength of 1550 ± 100 nm. At the two output ports a fraction of 10 % of the primary intensity is available. The individual in- and outputs of the coupler are connected to ST connectors.OC-2350 SM Four port fibre coupler unit

OC-2360 Fibre SM beam splitter unitThis component acts as fibre coupled beam splitter plate. It splits the incoming beam into two beams of equal intensity. The individual in- and outputs of the coupler are connected to ST connectors.OC-2360 Fibre SM beam splitter unit

OC-2410 Multimode fibre 1000 m 50/125 µmThe multimode fibre has a core diameter of 50 µm and a cladding diameter of 125 µm. Along with the plastic coating the total diameter is 250 µm. 1000 m of such a fibre are coiled on a drum.OC-2410 Multimode fibre 1000 m 50/125 µm

OC-2440 Single mode fibre, 1000 m, 9/125 µm, ST panel jacksThe single mode fibre has a core diameter of 9 µm and a cladding diameter of 125 µm. Along with the plastic coating the total diameter is 250 µm. 1000 m of such a fibre are coiled on a drum and both ends are terminated with ST single mode connectors which are plugged to single mode ST fibre panel jacks.OC-2440 Single mode fibre, 1000 m, 9/125 µm, ST panel jacks

OC-2450 Multimode fibre 1000 m, 50/125 µm,  ST panel jacksThe multimode fibre has a core diameter of 50 µm and a cladding diameter of 125 µm. Along with the plastic coating the total diameter is 250 µm. 1000 m of such a fibre are coiled on a drum and both ends are terminated with ST connectors which are plugged to ST fibre panel jacks.OC-2450 Multimode fibre 1000 m, 50/125 µm,  ST panel jacks

OC-2450 Multimode fibre 1000 m, 50/125 µm,  ST panel jacksThe multimode fibre has a core diameter of 50 µm and a cladding diameter of 125 µm. Along with the plastic coating the total diameter is 250 µm. 000 m of such a fibre are coiled on a drum and both ends are terminated with ST connectors which are plugged to ST fibre panel jacks.OC-2450 Multimode fibre 1000 m, 50/125 µm,  ST panel jacks

OC-2500 Plastic optical fibre ST/FSMA, length 0.25 mThis plastic optical fibre has a diameter of 1 mm and a length of 25 cm and is terminated on one side with a ST-POF connector and on the other side with a FSMA-POF connector.OC-2500 Plastic optical fibre ST/FSMA, length 0.25 m

OC-2502 Plastic optical fibre ST/ST, length 1 mThis plastic optical fibre has a diameter of 1 mm and a length of 100 cm and is terminated on both sides with a ST-POF connector.OC-2502 Plastic optical fibre ST/ST, length 1 m

OC-2510 Plastic optical fibre ST/ST, length 10 mThis plastic optical fibre has a diameter of 1 mm and a length of 10 m and is terminated on both sides with a ST-POF connector.OC-2510 Plastic optical fibre ST/ST, length 10 m

OC-2520 Plastic optical fibre ST/ST, length 20 mThis plastic optical fibre has a diameter of 1 mm and a length of 20 m and is terminated on both sides with a ST-POF connector.OC-2520 Plastic optical fibre ST/ST, length 20 m

OC-2530 Plastic optical fibre ST/ST, length 30 mThis plastic optical fibre has a diameter of 1 mm and a length of 30 m and is terminated on both sides with a ST-POF connector.OC-2530 Plastic optical fibre ST/ST, length 30 m

Flag of Germany